DC28
DC Geared Motor

DC28


DC Geared Motor


Standard Data
Parameter Value Unit
Motor type PM Brushed DC Motor
Combination with Mechtex Gear Series GB 2/5P/5H, GB 38OCP, GB B/C/L, GB 3/4/778, GBV/U/W/X
Standard motor voltages 24,12,6&3 (other verson request) V
Weight 65 g
Enclosure 30 IP
Mounting By snap clip or by screws
Life expectancy Approx 500 hours @ max efficiency
Direction Reversible
Application

Textiles, Farm equipments, Automotive, Vending machines, Chart recorder, Diamond machines.

Design

Design DC28 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Technical Data
Parameter Value Unit
Physical Data for (Dim. mm) 27.5 x 32.5 Dia x Height
No load data for Voltage 6 V DC
No load data for Speed 2400 RPM
No load data for No-Load 0.070 Current A
Data at Max Efficiency for Speed 15377 RPM
Data at Max Efficiency for Current 0.143 AMPs
Data at Max Efficiency for Torque 0.190 Ncm
Data at Max Efficiency for Effic 38 %
Data at Max Efficiency for Power 0.311 W(out)
Data at Max Efficiency for Power 0.825 W(in)
Stall for Torque 0.730 Ncm
Stall for Current 0.364 AMPs
Features

Design DC28 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Options

Design DC28 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Motor Connection
Lorem Lorem
Lorem Lorem
Transmission Ratio
20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115
Assembly Drawings
Drawing Image Not Available