DC30
DC Geared Motor

DC30


DC Geared Motor


Standard Data
Parameter Value Unit
Motor type PM Brushed DC Motor
Standard Motor Voltages 24, 12, 6, 3 ( Others on Request ) V
Weight 75 g
Enclouser 30 IP
Mounting By snap clip or by screw
Life expentency Approx 500 Hours or max efficiency
Direction Reversible
Application

Home automation, Clocks, Vending machines, Chart recorder, Coffee machines, Throttle control valve.

Design

DC30 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Technical Data
Parameter Value Unit
Physical Data for (Dim. mm) 32.5 x 29 Dia x Height
No load data for Voltage 12 VDC
No load data for Speed 1200 RPM
No load data for No-Load 0.020 Current A
Data at Max Efficiency for Speed 704 RPM
Data at Max Efficiency for Current 0.049 AMPs
Data at Max Efficiency for Torque 0.22 Ncm
Data at Max Efficiency for Effie 32 %
Data at Max Efficiency for Power 0.163 W(out)
Data at Max Efficiency for Power 0.505 W(in)
Stall for Torque 0.680 Ncm
Stall for Current 0.096 A
Features

DC30 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Options

DC30 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Motor Connection
Lorem Lorem
Lorem Lorem
Transmission Ratio
20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115
Assembly Drawings
Drawing Image Not Available