DC32
DC Geared Motor

DC32


DC Geared Motor


Standard Data
Parameter Value Unit
Motor type PM Brushed DC Motor
Combination with Mechtex Gear Series GB 2/5P/5H, GB 38OCP, GB B/C/L, GB 3/4/7/8, GB V/U/W/X
Standard motor voltages 24,12,6 & 3 (others on request) V
Weight 40 g
Enclosure 30 IP
Mounting By snap clip or by screws
Life expectancy Approx 500 hours @ max efficiency
Direction Reversible
Application

Blood Collection Monitor, Cam timer, Feeding systems, oil skimmer, Home automation, Diamond Polishing.

Design

DC32 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Technical Data
Parameter Value Unit
Physical Data for (Dim. mm) 32 x 19.5 Dia x Height
No load data for Voltage 12 VDC
No load data for Speed 3000 RPM
No load data for No-Load 0.015 Current A
Data at Rated Torque for Speed 2319 RPM
Data at Rated Torque for Current 0.045 AMPs
Data at Rated Torque for Torque 0.110 Ncm
Data at Rated Torque for Effie 50 %
Data at Rated Torque for Power 0.266 W(out)
Data at Rated Torque for Power 0.529 W(in)
Stall for Torque 0.530 Ncm
Stall for Current 0.164 A
Features

DC32 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Options

DC32 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Motor Connection
Lorem Lorem
Lorem Lorem
Transmission Ratio
20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115
Assembly Drawing
Drawing Image Not Available