DC38
DC Geared Motor

DC38


DC Geared Motor


Standard Data
Parameter Value Unit
Motor type PM Brushed DC Motor
Combination with Mechtex Gear Series GB 5P/5H, GB 38OCP, GB C, GB 3/4/7/8, GB V/U/W/X
Standard motor voltages 24,12,6 & 3 (others on request) V
Weight 220 g
Enclosure 20 IP
Mounting By screws
Life expectancy Approx 500 hours @ max efficiency
Direction Reversible
Application

Yarn Movement, Medical Equipment, Farm Equipment, Vending Machines, Diamond Machines, Gastronomy, Throttle Control Valve, Industrial Automation Machines, Scientific Instrumentation, Solar Equipments.

Design

DC38 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Technical Data
Parameter Value Unit
Physical Data for (Dim. mm) 36.0 x 50.1 Dia x Height
No load data for Voltage 6 VDC
No load data for Speed 580 RPM
No load data for No-Load 0.065 Current A
Data at Max Efficiency for Speed 382 RPM
Data at Max Efficiency for Current 0.086 AMPs
Data at Max Efficiency for Torque 0.290 Ncm
Data at Max Efficiency for Effie 25 %
Data at Max Efficiency for Power 0.117 W(out)
Data at Max Efficiency for Power 0.463 W(in)
Stall for Torque 0.900 Ncm
Stall for Current 0.156 A
Features

DC38 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Options

DC38 Series motors are DC motors (Outsourced) that are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.

Motor Connection
Lorem Lorem
Lorem Lorem
Transmission Ratio
20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115, 20, 34, 56, 76, 83, 112, 115
Assembly Drawings
Drawing Image Not Available