Image Not Found
Spur Reduction Gearhead - 30Nm


Spur Reduction Gearhead - 30Nm

Image Not Found

Standard Data
Parameter Value Unit
Gear type Spur
Gear Torque 30 Nm
Combination with Mechtex motors MT0, MT6, MTR/S5, MTR/S-4a/b, MTR/SD-4b,
MTR/SD4b-RE & DC motors (Up to dia 52 mm) MTR/S 7a & MTR/S 8c
Mounting any position
Weight 850 g
Axial thrust 600 N
Lateral force 900 N
Radial torque 12 Nm
Output bearing Sintered Bronze sleeve bushings, (Ball bearing on request)
Output shafts dia.15 x 26.5 mm (with a flat), others on request Ø
Ambient temperature operation -15...+ 55 °C
Enclosure 30 IP

Gearhead GBX contains heavily loaded steel gear wheels. The spur gears are fixed on steel spindles which are hardened and polished to a mirror finish & rotate in sintered bushings. The thick output shaft rotates in robust bronze bushings. All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance. GBX can also be combined with small to medium sizes of DC motors (up to 52mm). Output shaft can also be emerging from the rear side or both sides.  

Technical Data
Parameter Value Unit
Shaft type SO -
D (+0.00/-0.10) 19
H 6.5
d (dia) 15
L 46.5
I 35
d 13.5
Shaft Drawing
Drawing Image Not Available
Assembly Drawings
Drawing Image Not Available
Dimensional Drawing
Drawing Image Not Available
Torque / Life graph
Graph Not Available