High Torque Plastic Planetary Gearhead
GB102K

GB102K


High Torque Plastic Planetary Gearhead

Design

GB102K is a high- torque Plastic Gear Set with 29Nm to 185Nm Gear Torque and up to 938.85 Gear Ratio. It can combined with various types of motors. It is specially designed to cater to heavy-duty applications in a cylindrical frame with a center shaft. This is a planetary gearbox with all plastic gears all bearings are used for higher torque requirements along with its increased life.

The entire gearhead is permanently lubricated and therefore requires no maintenance. Brushed and Brushless DC  Motors up to 102mm diameter are generally mounted on this gearhead to provide a compact and yet powerful drive. This gearbox can combined with BLDC Motors as per requirement. 

Standard Data
Gear type   Spur Gears
Gear Torque Nm 20 to 80 
Axial Load N 150
Radial force N 450
Output Bearings   Ball bearing
Output shafts mm Ø 25 (others on special request)
Ambient temperature operation °C -15….+55°C (+80°C on special request #)  
Enclosure IP 40 (As per IEC 60529)

# Corresponding o/p torque rating of gearhead will be reduced.


Technical Data

Gearhead Data:

Reduction   3.71 5.18 13.73 19.2 26.85 35* 50.89 71.16 99.51 139.14 188.61 263.73 369.76 515.63 720.99 938.85*
Number of stages   1 1 2 2 2 2 3 3 3 3 4 4 4 4 4 4
Torque Nm 20 20 35 35 35 35 60 60 60 60 80 80 80 80 80 80
Gear Box Length (L)   74.6 74.6 98.1 98.1 98.1 98.1 121.6 126.6 126.6 126.6 145.1 145.1 145.1 145.1 145.1 145.1

Note: Ratios marked with * suffix available on special request


Dimensional Drawing

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here

«