DC30

DC30



Application

Home automation, Clocks, Vending machines, Chart recorder, Coffee machines, Throttle control valve.

Design

DC30 is a 24V DC Gear Motor with speed from 1200 rpm to 6200 rpm and Input Power from 0.50 W to 5.25 W. It can used in combination with many Mechtex spur gearboxes. Depending on the application, output speed, load applied, etc the type of gearboxes can be selected.

Various types of gears i.e. poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance. 


Standard Data
Motor type   PM Brushed dc motor
Combination with Mechtex Gear Series   GB 2/5P/5H, GB 38OCP, GB B/C, GB 3/4/7/8, GB V/U/W/X
Standard motor voltages V 24, 12, 6 & 3 volts
Weight g 75
Enclosure IP 30
Mounting   By snap clip or by screws
Life expectancy   Approx 500 hours @ max efficiency
Direction   Reversible


Technical Data
Mechtex Physical data No load data Data at max efficiency Stall
MODEL No. Dim. mm Voltage Speed No-Load Speed Current Torque Effic. Power Power Torque Current
  Dia x height V DC RPM Current A RPM Amps Ncm (%) W(out) W(in) Ncm A
A30 32.5 X 29 24 6200 0.060 5000 0.210 0.620 62.31 3.170 5.040 3.200 0.900
A30 32.5 X 29 12 3100 0.045 2345 0.146 0.35 49 0.847 1.713 1.420 0.465
A30 32.5 X 29 6 1500 0.035 1100 0.09 0.16 36 0.183 0.508 0.660 0.237
B30 32.5 X 29 12 6200 0.120 4990 0.438 0.56 55 2.866 5.254 3.070 1.900
B30 32.5 X 29 6 3100 0.100 2216 0.294 0.39 51 0.892 1.734 1.710 1.041
B30 32.5 X 29 3 1500 0.090 980 0.195 0.23 41 0.229 0.56 0.820 0.533
M30 32.5 X 29 24 2500 0.025 1752 0.07 0.39 45 0.705 1.578 1.460 0.188
M30 32.5 X 29 12 1200 0.020 704 0.049 0.22 32 0.163 0.505 0.680 0.096

Dimensional Drawing

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here

«