DC38

DC38



Application

Yarn Movement, Medical Equipment, Farm Equipment, Vending Machines, Diamond Machines, Gastronomy, Throttle Control Valve, Industrial Automation Machines, Scientific Instrumentation, Solar Equipments.

Design

It is a high-speed 12V DC Geared Motor with Input power from 0.46 W to 11.10 W. It can used in combination with many Mechtex spur gearboxes. Depending on the application, output speed, load applied, etc the type of gearbox can be selected.

Various types of gears i.e. poly acetal, sintered iron, brass, SRBF (helical) & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.


Standard Data
Combination with Mechtex Gear Series GB 2/5P/5H, GBC, GB 3/4/7/8, GB V/U/W/X
Standard motor voltages V 24, 12, 6 & 3 volts
Weight g 220
Enclosure IP 20
Mounting By screws
Life expectancy Approx 500 hours @ max efficiency
Direction Reversible


Technical Data
Mechtex Physical data No load data Data at max efficiency Stall
MODEL No. Dim. mm Voltage Speed No-Load Speed Current Torque Effic. Power Power Torque Current
  Dia x height V DC RPM Current A RPM Amps Ncm (%) W(out) W(in) Ncm mA
A38 36.3 X 50.1 24 5000 0.09 4184 0.48 1.78 69 7.661 11.103 12.7 2.86
A38 36.3 X 50.1 12 2500 0.08 1998 0.308 1.06 62 2.183 3.543 6.29 1.437
A38 36.3 X 50.1 6 1200 0.08 821 0.216 0.65 45 0.549 1.208 2.48 0.593
B38 36 X 50.1 12 5000 0.2 3747 0.867 1.55 59 5.995 10.186 7.84 3.49
B38 36 X 50.1 6 2500 0.18 1845 0.426 0.68 54 1.287 2.367 3.55 1.664
B38 36 X 50.1 3 1200 0.16 754 0.314 0.43 42 0.339 0.803 1.58 0.794
M38 36.0 X 50.1 24 2800 0.08 2198 0.186 1.07 55 2.418 4.377 4.61 0.642
M38 36.0 X 50.1 12 1350 0.07 890 0.139 0.66 38 0.606 1.599 2.1 0.315
M38 36.0 X 50.1 6 580 0.065 382 0.086 0.29 25 0.117 0.463 0.9 0.156

Dimensional Drawing

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here

«