Planetary Gear
GB32P

GB32P


Planetary Gear

Design

GB32P is a 32mm Planetary Gear with 0.5Nm to 4Nm Gear Torque and up to 938.85 Gear ratio. It can combined with various types of motors. It is specially designed to cater to precise and compact applications in a cylindrical frame with a center shaft. This is a planetary gearbox with the possibility of polyacetal gears in the first stage (for low noise) and the remaining stages being sintered metal or hardened metal (on special request). The output bearing is robust and is made of sintered bronze (ball bearing on special request).

The entire gearhead is permanently lubricated and therefore requires no maintenance. Brushed and Brushless DC  Motors up to 36mm in diameter are generally mounted on this gearhead to provide a compact yet powerful drive. This gearbox can combined with BLDC Motors as per requirement. 

Standard Data
Gear type   Spur Gears
Gear Torque Nm 0.5 to 5 
Axial Load N 30
Radial force N 100
Output Bearings   sintered bronze (Ball bearing on special request)
Output shafts mm Ø 6 (others on special request)
Ambient temperature operation °C -15….+80°C (+120°C on special request #)
Enclosure IP 40 (As per IEC 60529)

# Corresponding o/p torque rating of gearhead will be reduced.

Technical Data

Gearhead Data:

Reduction   3.71 5.18 13.73 19.2 26.85 35* 50.89 71.16 99.51 139.14 188.61 263.73 369.76 515.63 720.99 938.85*
Number of stages   1 1 2 2 2 2 3 3 3 3 4 4 4 4 4 4
Torque  Nm 0.5 0.5 0.8 0.8 0.8 0.8 2 2 2 2 5 5 5 5 5 5
Gear box Length(L) mm 20.6 20.6 27 27 27 27 33.4 33.4 33.4 33.4 39.8 39.8 39.8 39.8 39.8 39.8

Note: Ratios marked with * suffix available on special request

Dimensional Drawing

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here

«