Diamond machine.


MTS4a is a 7.5° Step Angle Stepper Motor with holding torque 6.2 Ncm. with a simple mechanical structure. Clawpole principle (Tin Can) with 2 stator halves. Self-lubricated sintered sleeve with long life expectancy. These motors can combined with Spur Gearboxes as per requirement. 

Standard Data
Motor type    Permanent Magnet (PM) stepper motor
Electrical Enclosure IP 40
Connections   Flexible Leads 22 AWG, 200mm length; ends stripped 10 mm
Life expectancy   3 years in continuous operation
Weight g 200
Mounting   Any position by ears or screw clip

Technical Data
Steps per revolution     48    
Degree/step     7.5    
Winding type     bipolar    
Standard voltages 6 12 24  
Resistace per winding W 9.5 61 251  
Winding type     unipolar    
Standard voltages 6 12 24  
Resistace per winding W 15 61 251  
Winding temperature °C   105 max    
Holding torque Ncm 6.2 MTSB4a 4.5 MTSU4a
Axial force N   3    
lateral force N   6    
Rotor inertia g-cm2   6    

Dimensional Drawing

Dimensional Drawing of Mechtex Pm Stepper Motor - MTS4a

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here