Spur Gear Drive with Polyacetal Gears
GB38OCP

GB38OCP


Spur Gear Drive with Polyacetal Gears

Application

Instrumentation, diamond machinery, peristaltic pumps, motorized displays, programming devices, cam timers, medical equipment, valves, and actuators.


Design

GB38OCP is a Spur Gear Drive with Polyacetal gears and 0.5Nm Gear Torque. It can combined with various types of motors. It is a multi-step gearhead with all polyacetal gears that rotate on steel spindles that are polished to a mirror finish and introduced between metal plates with a plastic frame. All bearings are permanently lubricated and therefore require no maintenance.

Thicker shafts (Ø6-7mm) mounted in robust bushings (Ø12) are available. Similarly, the gears at the output end can be metal (GB38OCPH) with thick shafts (Ø6-7mm) & robust bushings. A sintered gears variant is also possible (GB38OCSi). This gearbox can combined with Synchronous MotorsPM Stepper Motors, and DC Geared Motors as per requirement. 


Technical Data
Gear type   Spur
Gear Torque Nm 0.5
Combination with Mechtex motors   small DC motors up to dia. 35mm (DC28/30/32) & MTR3a/3b & MTS3a/3b
Mounting   any position
Weight g 55
Axial thrust N 20
Lateral force N 60
Radial torque Nm 0.6
Output bearing   Sintered bronze sleeve bushings, (Ball bearing on request)
Output shafts Ø Shafts same as GB5P gear series
Ambient temperature operation °C -15...+ 55
Enclosure IP 30

Dimensional Drawing
Dimensional Drawing of Mechtex Spur Gearbox GB38OCP

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here

«