2 Stage Reduction Spur Gear Drive


2 Stage Reduction Spur Gear Drive


Instrumentation, diamond machinery, peristaltic pumps, motorized displays, programming devices, cam timers, medical equipment, valves, and actuators.


GBC is a 2-stage reduction Spur Gear Drive with 0.5Nm Gear Torque. It can combined with various types of motors. The gearhead is a spur reduction gearhead with a 37mm OD & OFF center shaft meant specially for DC motors with diameters up to 36 mm. It is possible to mount 2 series synchronous and stepper motors. It is also possible to mount 3 series motors on special request only. It has a possibility of 2 to 8-stage reduction with initial stages being poly-acetal gears & final stages being steel sintered

All bearings are permanently lubricated &  therefore require no maintenance. The motor is attached to the gearbox using screws.  The nominal torque rating for this gearhead is 0.5 Nm with a peak torque range of up to 0.8 Nm. This gear head is been categorized in 3 different housing sizes as per gear reduction for the 4, 6 &  8 stages. This gearbox can combined with Synchronous MotorsPM Stepper Motors, and DC Geared Motors as per requirement. 

Technical Data
Gear torque Nm 0.5
Gear type   Spur (1st pair helical)
Combination with Mechtex Motors   DC24 / DC28 / D32 / DC30* / DC38* others on request
Mounting   any position; preferrably with shaft horizontal
Weight g Variable with reduction stages (180 approx)
Axial thrust N 15
Radial torque Nm 0.6
Lateral force N 50
Output Bearing   Sintered bronze
Output shafts Ø dia. 6 x 21 mm (with a flat); others on request
Ambient temperature operation °C -15 ... +55
Enclosure IP 30

Dimensional Drawing
Dimensional Drawing of Mechtex Spur Gearbox - GBC

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies Find out more here